Durovac 2212 Strong Bonding Adhesive (4KG)
(a) Surface Preparation The surface to be bonded must be free from dust and clean. Wood with oil or grease should be cleaned with organic solvents or thinner before bonding.
(b) Application Apply an even film of Durovac 2212 with brush or machine on one surface to be bonded. Assemble together while the surface is still wet. The drying time is between 10 to 30 minutes, depends on the porosity of the surface and also the amount of adhesive applied. Once place in position apply pressure on the bond during initial setting. Bonding pressure can be applied using presses, clamps or dead loads.
1 x Durovac 2212 Strong Bonding Adhesive (4KG)